A:

1. Firstly, you need to determine if the membrane of the home RO System is really blocked. 2. Understand the water quality in the region and see if the main components of scale are mainly composed of calcium and magnesium salts. 3. Dispense the syrup (10% hydrochloric acid) or the diluted detergent (descaling detergent on the market) and the special RO membrane cleaning agent according to the composition of the scale, and place the RO membrane therein for 24 hours. 4. Next, rinse the RO membrane after soaking, and rinse the RO membrane with water produced by ultrafiltration. When flushing, close the pure water outlet and open only the waste water outlet.

A:

1. raw water with high salt content, too many scales. 2. the content of organic matter in the water exceeds the standard, RO membrane is fouled and plugged 3. high RO film recovery rate 4. the purifier is not equipped with flushing function. After long-term use, high-concentration brine is deposited in the RO membrane shell.

A:

it is important to clean the membrane elements when any of the following conditions occur: 10-15% decrease in normalized permeate flow 10-15% increase in normalized permeate total dissolved solids (TDS) 10-15% increase in normalized pressure drop between feed and reject

A:

200GPD is better, there’s less glue during production, better salt rejection rate and water flow.